The Home Spot

How to Reset Your Garage Door Keypad Without the Enter Button

Home security is paramount, and a crucial part of this is the ability to control access to your garage. The garage door keypad serves as a formidable line of defense, allowing only those with the correct passcode to gain entry. However, there may be occasions when you find yourself unable to enter your garage due to a malfunctioning keypad or a forgotten password. In such cases, knowing how to reset your garage door keypad without the enter button can prove invaluable. This article offers a detailed, step-by-step guide on how to do this.

Resetting the Chamberlain Garage Door Keypad

Chamberlain is a reputable name in the field of garage door openers. If you’ve forgotten your old code and need to reset your Chamberlain garage door keypad, follow these steps:

  1. Remove the back cover of the remote control to access the internal switches.
  2. Simultaneously press and hold the * and # buttons. You’ll see a blinking red light, indicating that the password is resetting.
  3. Enter your new 4-digit password and press the # button again.
  4. Select the type of door opener you’re using, which could be numbers 1-9, then press the # button.
  5. Climb on a ladder and press the “Learn” button on the door opener.
  6. Before the blinking red light stops, go to the keypad and input your new password key.

Following these steps should restore the functionality of your Chamberlain garage door keypad. However, if the problem persists, it may be wise to seek professional assistance.

You can read more about it here on the official website.

Resetting the LiftMaster Garage Door Keypad

LiftMaster is another renowned brand in the realm of security devices, boasting a track record of over 50 years. Resetting your LiftMaster keypad without the enter button is a straightforward process:

  1. Unplug the opener to avoid accidental shocks and facilitate efficient work.
  2. Change the mode from operating to program mode. To do this, remove the faceplate and find the dual program button.
  3. Once in program mode, set a new pin. Afterward, switch back to operating mode and plug the door opener back in.

You can read more about it here.

Resetting the Clicker Garage Door Keypad

Forgetting the code to your garage door opener need not be a cause for panic. You can easily reset it with these steps:

  1. Access the motor unit located at the top of the door opener. You may need a ladder to reach it.
  2. Find the learn knob on the motor unit.
  3. Long press the learn knob until the light stops blinking. This erases the old password from the system, allowing the garage door opener to operate without a code.
  4. Press the learn knob again to turn the light back on. Then, input a new password on the keypad.

Why You Need to Reset Your Garage Door Keypad

Resetting your garage door keypad isn’t solely a measure to take when you forget your code. It’s also advisable to change your passcode periodically to enhance security. Frequent passcode changes can deter potential intruders who may have gotten hold of your previous code.

Reasons for resetting your garage door keypad may include:

  1. Moving into a new environment: A fresh start often calls for a new code.
  2. Observing suspicious activities in your neighborhood: Don’t take chances; change your security code as soon as possible.
  3. Sharing your code with a visitor: Once they depart, reset the code. Your security code should be known only to permanent residents.
  4. Suspecting a break-in attempt: Change your password immediately!
  5. Misplacing your garage door remote: When you get a new one, change the code.

You can read more about it here.

Common Problems with Garage Door Keypads

Various problems can render your garage door keypad non-functional. Understanding these issues can help you troubleshoot and possibly rectify them before resorting to a full reset.

Depleted Batteries

Batteries are the life force of your garage door keypad. Over time and with regular use, they can run out of power, rendering your keypad non-functional. If your keypad shows no sign of life, such as visible or blinking lights, it could be a sign that the batteries need replacing.

Faulty Capacitors

The capacitor is integral to the operation of your garage door opener. It powers the motor of the opener chain or screws. However, high energy currents or excessive use can damage the capacitor, preventing your garage door from opening. A humming or buzzing noise often signifies a faulty capacitor.

Damaged Keypad

Garage door keypads are generally exposed to the elements, which can impair their functionality. Extreme temperatures, excessive humidity, or general wear and tear can damage the keypad. While some keypads can last for up to a decade, others may need replacing sooner.

Incorrect Pin

Multiple failed attempts to enter the correct pin can lead to the keypad becoming blocked. If this happens, even entering the correct password won’t grant you access. You’ll need to reset your keypad and create a new password in this scenario.

Worn-out Wires

Worn-out or damaged wires can render your keypad ineffective. If you’ve ensured the batteries are functioning and you’re entering the correct pin, it might be time to check the wires. If they’re not correctly placed, adjust them until they’re securely connected. If you’re uncertain about this, it’s best to enlist the help of a professional.


Resetting your garage door keypad is a fairly simple process once you know how to do it. Whether you have a Chamberlain, LiftMaster, or any other brand of garage door keypad, this guide should provide you with the necessary steps to reset your keypad, ensuring your home’s security is never compromised.

Trisha Mae Raymundo
Trisha Mae Raymundo

Senior Writer and Editor of The Home Spot.